BB1 6-way Powerbar mechanical specifications
in depth | mechanical specifications | power bars | downloads
| Dimensions | |
| Length | 1380 mm |
| Height | 80 mm |
| Width | 147 mm |
| Weight | 9.8 kg |
| Mechanical design/ materials used | |
| Box | folded and welded steel |
| Finish | Electro static powder coated black satin |
| Rigging | |
| Style | 6 ¼ turn camloc fasteners |
| Number of positions | 3 rigging locations on yoke |
| Note: unit comes with two Omega rigging bracket to accept 12mm bolts. | |
| Electrical: | |
| Input | 90- 265 Volt 50/60 Hz or 13.4 Volts DC from battery inlet |
| Current: | 0.75 amps @ 240 volts |
| Power | 180 watts total power on full @ 240 volts |
| Fuse | 20mm x 5mm slow blow 2 amp |
| Cables & connectors. | |
| Input | chassis mounted IP67 6 pin ( Combined power and data connection ) |
| Through output | chassis mounted female IP67 6 pin ( Combined power and data connection ) |
| Low voltage output | 4 x chassis mounted IP67 5 pin ( Combined low voltage power and data connection ) Note; units comes complete with 16 amp plug and 5 pin male. |
| Control | |
| Data type | USITT DMX512-A & RDM DMX |
| User interface | weatherproof backlit lcd display with four membrane switches |
| Thermal characteristics | |
| Cooling | force air cooled via low airflow/ low noise fans |
| Operating temperature | Minimum: -20 degrees C Maximum:+ 46 degrees C |
| Weather protection | |
| Rating | Rated to IP65 |
| Humidity max | 20% ~ 90% RH non-condensing |
| Approvals & Compliance | |
| BS EN 55103-1 Harmonics | |
| BS EN 55103-2 Immunity | |
| BS EN 61000-3-2 Emissions | |
| USA / Canada ETL pending | |
