BB 2x2 tech spec
introduction | technical data | photometrics | downloads
| Dimensions: | |
| Length | 355 mm |
| Height | 373 mm |
| Width | 210 mm |
| Weight | 14.6Kg |
| Mechanical design/ materials: | |
| Batten | aluminium shrouded finned diagonal heatsink |
| Yoke | folded and welded steel |
| Finish | Electro static powder coated black satin |
| Rigging: | |
| Style | 14 ¼ turn camloc fasteners |
| Number of positions | 13 rigging locations on yoke |
| Accessory holder | fitted with sprung retention flap |
| Conventional mounts | 2 of 12mm bolt holes fitted at each yoke end |
| Note: unit comes with two Omega rigging brackets to accept 12mm bolts. | |
| Connection: | |
| Input | chassis mounted male IP67 6 pin ( Combined power and data ) |
| Output | chassis mounted female IP67 6 pin ( Combined power and data ) |
| Fixture feed | units comes complete with 16 amp plug and 5 pin male. |
| Electrical: | |
| Input | 90- 265 Volt 50/60 Hz |
| Power | 0.5 amps @ 240 volts |
| Fuse | 20mm x 5mm slow blow 2 amp |
| Control: | RGB additive colour mixing |
| DMX channels | 3 channels minimum 36 channels maximum |
| User interface | backlit lcd display with four membrane switches |
| Data type | USITT DMX512-A |
| Light Engine: | |
| Source | customised RGB LED |
| Optics | 4 x 10° optics with 20°,35° & 45° also available |
| Thermal characteristics: | |
| Type of cooling | force air cooled via low air flow/ low noise fans |
| Operating temperature | Minimum: -20 degrees C Maximum:+ 46 degrees C |
| Weather protection: | |
| IP rating | Rated to IP65 |
| Humidity max | 20% ~ 90% RH non-condensing |
| Approvals & Compliance | |
| BS EN 55103-1 Harmonics | |
| BS EN 55103-2 Immunity | |
| BS EN 61000-3-2 Emissions | |
| USA / Canada ETL pending | |
