BB 4 Washlight tech spec
features | applications | in depth | tech spec | downloads
| Dimensions | |
| Length | 600 mm |
| Height | 301 mm on rubber feet |
| Width | 147 mm |
| Weight | 13.5Kg total Yoke: 3 KG Power Box: 4.5Kg BB4 batten: 6Kg |
| Mechanical design/ materials used | |
| Batten | aluminium shrouded finned diagonal heatsink |
| Power box | aluminium with steel base |
| Yoke | folded and welded steel |
| Finish | Electro static powder coated black satin |
| Rigging | |
| Style | 16 ¼ turn camloc fasteners |
| Number of positions | 8 rigging locations on yoke |
| Accessory holder | fitted with sprung retention flap |
| Conventional mounts | 2 of 12mm bolt holes fitted at each yoke end |
| Note: unit comes with three top hat rigging points to accept 12mm bolts, equipped with two camloc ¼ turn bolts | |
| Electrical connections for mains and data in/out | |
| Combined power and data connection | |
| Input | chassis mounted male IP67 6 pin |
| Output | chassis mounted female IP67 6 pin |
| Fixture feed | chassis mounted female IP67 7 pin |
| Fixture feed | trailing 7 pin male |
| Mains and data | |
| Input inline female | 6 pin Ceep |
| Output | 6 pin Ceep |
| Electrical | |
| 120 watts total power on full. | |
| Input | 90- 265 Volt 50/60 Hz |
| Power | 0.5 amps @ 240 volts |
| Fuse | 20mm x 5mm slow blow 2 amp |
| Output to fixture | 15 volts max |
| Data type | USITT DMX512-A |
| Note; units comes complete with 16 amp plug and 5 pin male. A 1 metre combined power cable link is also supplied. | |
| Control | RGB additive colour mixing |
| DMX channels | 3 channels minimum 37 channels maximum |
| User interface | weatherproof backlit lcd display with four membrane switches |
| Modes | 8 bit standard resolution: |
| 1 1 x RGB over four pixels | |
| 3 1 x RGB x 4 with overall master and strobe | |
| 5 4 x RGB | |
| 7 4 x RGB with individual master and strobe | |
| 9 4 X RGB with combined master and strobe | |
| 16 bit high resolution (recommended) | |
| 2 1 x RGB over four pixels | |
| 4 1 x RGB x 4 with overall master and strobe | |
| 6 4 x RGB | |
| 8 4 x RGB with individual master and strobe | |
| 10 4 X RGB with combined master and strobe | |
note 16 bit for every channel bar strobe which runs as 8 bit |
|
| Light Engine | |
| Source | customised lamina Titan RGB LED |
| Wavelengths | Red 625 Nm +/- 2.5 Nm |
| Green 517 Nm +/- 2.5 Nm | |
| Blue 452.5 Nm +/- 2.5 Nm | |
| Optics | 4 x evenly spaced 20 degree optic |
| Thermal characteristics | |
| Fixture front | passive convection cooled |
| Power box | Force air cooled via low airflow/ low noise fans, mounted to the base |
| Operating temperature | Minimum: -20 degrees C Maximum:+ 46 degrees C |
| Weather protection | |
| Fixture front | hermetically sealed to IP67 |
| Power box | mounted horizontally facing upwards, Rated to IP65 |
| Humidity max | 20% ~ 90% RH non-condensing |
| Approvals & Compliance | |
| BS EN 55103-1 Harmonics | |
| BS EN 55103-2 Immunity | |
| BS EN 61000-3-2 Emissions | |
| USA / Canada ETL pending | |
| lead and mercury freereturn to manufacturer for recycling | |
| IP Protection | Patents filed in USA |
features | applications | in depth | tech spec | downloads
