BB 7 beamlight and washlight from i-pix
introduction | technical data | photometrics | downloads
The BB 7 is a beamlight, washlight or floodlight in one fixture. With easy swap over of optics it is possible to configure the fixture to suit your application. Split beam 10/ 35 degree optics further enhances the fixtures versatility.
Seven custom light engines provide superior color and intensity. Only 210 watts /0.9 amps at 240 volts. A distinctive hexagonal form with seven RGB optics gives this led fixture a unique appearance. A range of ten different 8 and 16 bit operating modes allow for various setups.
The fixture can be setup to run independent of control with built in programmable memories and a 20 step chase with adjustable wait and fade times. An enhanced optional dimmer curve gives produces a finer control when used with dmx desks. Easy camloc mounted yoke provides tool free swap over of rigging accessories. A standard yoke and free standing yoke are available with optional rigging accessories for clusters of six and seven BB 7's!
Optical accessories include a seven top hat design, to help reduce secondary glare, when just the beam is required. The fixture comes equipped with 10 degree optics, the 20 and 35 optics are shipped separately, taking about a minute to swap over the optics A combined power and data connection makes multiple cable hook up easy with an output link provided within the fixture design.
BB7 key features
- Energy efficient additive high power colour mixing
- 10,20 or 35 degree optics
- Easily remove and replace optics in about a minute.
- Customized RGB light engines for increased colour and intensity performance
- Efficient heat dissipation of both led heat and control section
- Self contained device
- Built in user interface for additional functionality
- Built in functions for dmx use and stand alone use
- A variety of different operating modes are provided for differing applications
- Super fast strobe from constant on to a slow pulse, colour oscillations are possible
- Ten degree beam angle as standard
- Optional accessory slot for adding 'top hat style secondary glare reducer
- 16 amp and 5 pin XLR input accessory cable supplied
- Easy single cable connection via 1.5 metre power and data input
- Chassis mounted combined power and data output for daisy chaining adjacent units 16amps max
- Stand alone function provides memory storage
- A stand alone chase sequence of using specified memories
- Auto ranging power input 100v to 240 volts, ideal for touring globally
- Dual safety points provided as standard
- Flightcase packages available along with accessories
