BB 7 tech specs
features | applications | in depth | tech spec | downloads
| Dimensions | |
| Length | 617 mm overall height from yoke top to point at base |
| Depth | 217 mm overall depth |
| Width | 516 mm overall width with standard yoke fitted |
| Weight | 19Kg total |
| Mechanical design/ materials used | |
| Batten | aluminium shrouded finned diagonal heatsink |
| Yoke | folded high grade alluminium |
| Finish | Electro static powder coated black satin |
| Rigging | |
| Style | 4 ¼ turn camloc fasteners which yoke/ rigging options attach to |
| Accessory holder | fitted with sprung retention flap |
| Conventional mounts | 1 of 12mm bolt holes fitted at each yoke end |
| Electrical connections for mains and data in/out | |
| Combined power and data connection | |
| Input | chassis mounted male IP67 6 pin |
| Output | chassis mounted female IP67 6 pin |
| Electrical | |
| 210 watts total power on full. | |
| Input | 90- 265 Volt 50/60 Hz |
| Power | 0.9 amps @ 240 volts |
| Fuse | 20mm x 5mm slow blow 2 amp |
| Output to fixture | 15 volts max |
| Data type | USITT DMX512-A |
| Note; units comes complete with 16 amp plug and 5 pin male. | |
| Control | RGB additive colour mixing |
| DMX channels | 3 channels minimum 63 channels maximum |
| User interface | weatherproof backlit lcd display with four membrane switches |
| Modes | 8 bit standard resolution: |
| 1 1 x RGB over seven pixels | |
| 3 1 x RGB x 7 with overall master and strobe | |
| 5 7 x RGB | |
| 7 7 x RGB with individual master and strobe | |
| 9 7 X RGB with combined master and strobe | |
| 16 bit high resolution (recommended) | |
| 2 1 x RGB over seven pixels | |
| 4 1 x RGB x 7 with overall master and strobe | |
| 6 7 x RGB | |
| 8 7 x RGB with individual master and strobe | |
| 10 7 X RGB with combined master and strobe | |
note 16 bit for every channel bar strobe which runs as 8 bit |
|
| Light Engine | |
| Source | customised lamina Titan RGB LED |
| Wavelengths | Red 625 Nm +/- 2.5 Nm |
| Green 517 Nm +/- 2.5 Nm | |
| Blue 452.5 Nm +/- 2.5 Nm | |
| Optics | 7 x evenly spaced 10 degree optic |
| Thermal characteristics | |
| Fixture rear | passive convection cooled |
| Fixture front | Force air cooled via low airflow/ low noise fans, mounted within the chassis |
| Operating temperature | Minimum: -20 degrees C Maximum:+ 46 degrees C |
| Weather protection | |
| Fixture | This fixture will work outside with optional weather proofing, otherwise IP20 |
| Humidity max | 20% ~ 90% RH non-condensing |
| Approvals & Compliance | |
| BS EN 55103-1 Harmonics | |
| BS EN 55103-2 Immunity | |
| BS EN 61000-3-2 Emissions | |
| USA / Canada ETL pending | |
| lead and mercury free return to manufacturer for recycling | |
| IP Protection | Patents filed in USA |
features | applications | in depth | tech spec | downloads







