i-Beam technical data
Introduction | technical data | photometrics | downloads
| Optical | |
| light source | High powered led engine RGBW source |
| wavelengths | Red 623 nm |
| Green 525 nm | |
| Blue 460 nm | |
| White 5500°K | |
| total luminous flux | 1405 lm |
| Dimensions | |
| length | 326 mm |
| width | 301 mm |
| height | 250 mm |
| weight | 7.5 Kg / 16.5 lb. |
| Construction | |
| materials used | stainless steel and alluminium casting |
| paint finish | powder coated |
| Electrical | |
| input | 90 volts to 265 volts |
| power consumption | 42W RGBW full |
| connections | powercon power in |
| powercon power out | |
| 5 pin xlr dmx in | |
| 5 pin xlr dmx in | |
| powercon battery in | |
| Control | DMX |
| 10 operating modes 16 & 8 bit | |
| stand alone | up to 20 internal memories |
| (for single fixture only) | chase built from these memories |
| 2 second to 255 seconds wait and crossfade times | |
| Weather protection | IP20, not watertight |
| Approvals and compliance | bs en 55103-1 harmonics |
| bs ed 55103-2 immunity | |
| bs en 61000-3-2 emissions | |
| usa / canada ETL pending |
