i-pix accessories
Power Bars for BB1
![]() |
Available in 4 or 6 way versions, these bars feature built-in power supplies and multiple rigging points. The bars also feature battery inlet points. The Power Bar provides low voltage to the BB1 and is equipped with an onboard user interface. This allows each fixture to be individually addressed and the 'operating' mode to be adjusted. Both power and data are fed neatly through a combined data/LV power cable. |
![]() |
4 way BB1 Powerbox. Includes 2 omega brackets and European input cable with 16 amp ceeform plug and 5 pin male XLR |
![]() |
Laptop PSU |
|
|
Hanging frames for BB2, BB3 and BB4
![]() |
![]() |
The units lock quickly and securely to the frames with a cam locks. A three way bracket, not shown here is also available. |
![]() |
Omega bracket | |
Battery wireless bag
Flightcases for i-Pix LED fixtures
![]() |
BB4 case |
![]() |
Sat 2 case |
Battery packs
![]() |
Satellite battery pack Transforms the new satellite into a freestanding, focusable RGBW device, with stand alone or wireless DMX playback. Designed to run for a minimum of 9 hours with three of the four channels on full intensity. |
I-Pix cables
![]() |
European input cable |
![]() |
European output cable |
![]() |
1 metre 6 pin cable |
![]() |
2.5 metre 6 pin cable |
![]() |
5 metre 6 pin cable |
![]() |
10 metre 6 pin cable |
![]() |
15 metre 6 pin cable |
![]() |
20 metre 6 pin cable |
![]() |
BB1 5 pin 1 metre cable |
![]() |
BB1 5 pin 2.5 metre cable |
![]() |
BB1 5 pin 5 metre cable |
![]() |
BB1 5 pin 10 metre cable |























