New from i-Pix in 2010
The expansion of the BB range continues with the introduction of four new 'Building blocks' for wash and beam work.
Following the huge success of the I-Pix BB4 we will be launching some new family members:
These new fixtures are a BB 4, a BB 3, a BB 2 and a BB 2x2. These fixtures have a battery inlet point and can be run from a battery pack with wireless dmx. The BB3 has three optics inline, and the BB2x2 as shown above is a block of 4. The interchangable optics together with the optional wireless and battery power offer the designer unprecedented new opportunities for location lighting.
- Versatile homogenised optics expand the range of possibilities further 10,20 and 35 degrees, mix and match for split beam looks.
- Custom RGB light engine with excellent colour gamut, produces tungsten and daylight whites with ease.
- Second generation electronics for extremely smooth response especially at low levels.
- Energy saving technology, displace older tungsten, power hungry fixtures with newer more versatile led technology.
- Remote battery and wireless dmx connection for speedy tidy rigs without cable hook up.
- On board memory storage and playback for stand alone projects.
The BB1 range expands with new 4 & 6 lamp Power Bars
The versatile single head building block system is now available in new rigging formats: 4 and 6 way bars. These bars feature built-in power supplies and multiple rigging points. The bars also feature battery inlet points.
The 4 and 6 lamp Power Bar is yet another versatile way in which our BB1 LED fixtures can be deployed..
The Power Bar provides low voltage to the BB1 and is equipped with an onboard user interface. This allows each fixture to be individually addressed and the 'operating' mode to be adjusted. Both power and data are fed neatly through a combined data/LV power cable.
The user interface will receive and transmit either 8 or 16 bit DMX to the fixtures, and will run in stand-alone mode - whereby up to 20 memories can be stored, and a chase created from these.
The Power Bar is fitted with Camlock mounts for connecting to the Omega bracket on the BB1 unit, to facilitate quick and easy truss or boom rigging. As well as these suspension points, there is a centrally located spigot position for rigging onto stands of all types.
Combined power and data in and outs are useful for feeding multiple Power Bars from a single power/data feed.
A tough (optional) rain cover is available for outdoor use, and the Power Bar is also fitted with a connection for the attachment of a remote battery and wireless DMX facility.
i-Pix has also developed a new waterproof Battery Bag that uses standard 12 volt batteries and provides complete stand-alone flexibility where power or lack of rigging time are issues. The Battery Bag can be used to power either a single BB4 fixture or the Power Bars individually.
Each bag comes with the option of wireless control, courtesy of City Theatrical, which also provides a local DMX outlet for other technology that might be adjacent to the Power Bars. Runtime is a 35 hour life for an RGB chase, 16 hours life for a CYM chase (with two colours on at once) and 9 hours for full intensity - measured using a BB4.
BB1 tunable white fixture
In january we launch a BB 1 with tuneable warm to cold white with a red boost for full colour gamut.
All BB1 units are available as standard finished in black or white. They can be individually hung from ceiling plates, clamps or will floor stand on their double yoke.
Multi mounting options include the bars mentioned above as well as 4-way inline frames, 4-way blocks and 3-way blocks.
Please see the BB1 page for further details.
